Steps to Creating Safe Deck Railings

Railings are the most visible element of any deck. They make an instant design statement for all to see and admire from a distance and close up. Deck railings do more than add a safety feature to a deck. They establish the style and limits of the deck space itself. Local building code standards won't affect the nearly endless number of deck design choices and construction choices to be used. Railings are not necessary on all decks but when they are, usually because of the deck's height above ground level, it is important to make a wise choice as to their design and structure.

Step #1 - Deck Height:

Railings are generally required for decks over 36 inches high above ground level and for any set of stairs. However, 24 inches might be a better minimum because in today's society people are more likely to sue a homeowner in the event of a fall. All it takes is one too many drinks and no railing for an accident to occur. In many cases the injured parties who launch these lawsuits are relatives or friends who just happen to be the individuals most likely to be on your deck. It's better to be safe than sorry!

Step #2 - Railing Height:

Railings are generally 36 to 42 inches above a deck's surface. They can be as low as 30 inches or as high as 48 inches depending upon the height of the deck above ground level. The rule of thumb is: The higher the deck; the higher the railing. This is all done for safety considerations. Deck railings can have wood, vinyl or aluminum balusters as well as louvers. They can be built with solid facings that can include plywood siding, plastic panels or tempered glass. However, they need to be a safe height above the level of the deck.

Step #3 - Railing Construction:

Railings are made up of vertical posts capped and joined by a cross member laid flat. The cross member may be the same width or wider than the posts. The spacing distance between the posts depends upon the cap's size and the horizontal rail's length. For example, 4x4 posts can be spaced up to 4 feet apart under a 2x4 cap while 4x4 posts can be spaced up to 6 feet apart under a 2x6 cap.

The strongest and simplest railings are those with horizontal parts secured by bolts or screws to the outside faces of the posts. For a cleaner, more streamlined railing, the horizontals would be placed between the posts. Building codes specify the maximum space between balusters, often 4 inches. Screws and bolts are always a better choice for the construction of railings.

Railings should coordinate with the architectural style of the home in some way. This can be done in terms of materials used, detailing and connections. It is important to check with local building code bylaws to clearly determine the requirements in terms of railing height, material types, lumber sizes, distances between support posts and distances between balusters.

The important things to do in the building of deck railings are to create a railing that complements your overall deck design, to comply with local building codes and to take the time to do the job as well as possible. In no time you'll have a railing system in place on your deck that will be the envy of the neighborhood.

Richard Vande Sompel is a professional deck builder of 35 years and over 850 decks built and is the author of "How to Plan, Design and Build a Deck from Start to Finish". To Learn More About Deck Railings and Claim your 2 FREE Deck Plans, Insider Report, MP3 Audio and discover everything to know about building a deck visit: http://www.DeckBuildingRevealed.com

Steps to Creating Safe Deck Railings

Railings are the most visible element of any deck. They make an instant design statement for all to see and admire from a distance and close up. Deck railings do more than add a safety feature to a deck. They establish the style and limits of the deck space itself. Local building code standards won't affect the nearly endless number of deck design choices and construction choices to be used. Railings are not necessary on all decks but when they are, usually because of the deck's height above ground level, it is important to make a wise choice as to their design and structure.

Step #1 - Deck Height:

Railings are generally required for decks over 36 inches high above ground level and for any set of stairs. However, 24 inches might be a better minimum because in today's society people are more likely to sue a homeowner in the event of a fall. All it takes is one too many drinks and no railing for an accident to occur. In many cases the injured parties who launch these lawsuits are relatives or friends who just happen to be the individuals most likely to be on your deck. It's better to be safe than sorry!

Step #2 - Railing Height:

Railings are generally 36 to 42 inches above a deck's surface. They can be as low as 30 inches or as high as 48 inches depending upon the height of the deck above ground level. The rule of thumb is: The higher the deck; the higher the railing. This is all done for safety considerations. Deck railings can have wood, vinyl or aluminum balusters as well as louvers. They can be built with solid facings that can include plywood siding, plastic panels or tempered glass. However, they need to be a safe height above the level of the deck.

Step #3 - Railing Construction:

Railings are made up of vertical posts capped and joined by a cross member laid flat. The cross member may be the same width or wider than the posts. The spacing distance between the posts depends upon the cap's size and the horizontal rail's length. For example, 4x4 posts can be spaced up to 4 feet apart under a 2x4 cap while 4x4 posts can be spaced up to 6 feet apart under a 2x6 cap.

The strongest and simplest railings are those with horizontal parts secured by bolts or screws to the outside faces of the posts. For a cleaner, more streamlined railing, the horizontals would be placed between the posts. Building codes specify the maximum space between balusters, often 4 inches. Screws and bolts are always a better choice for the construction of railings.

Railings should coordinate with the architectural style of the home in some way. This can be done in terms of materials used, detailing and connections. It is important to check with local building code bylaws to clearly determine the requirements in terms of railing height, material types, lumber sizes, distances between support posts and distances between balusters.

The important things to do in the building of deck railings are to create a railing that complements your overall deck design, to comply with local building codes and to take the time to do the job as well as possible. In no time you'll have a railing system in place on your deck that will be the envy of the neighborhood.

Richard Vande Sompel is a professional deck builder of 35 years and over 850 decks built and is the author of "How to Plan, Design and Build a Deck from Start to Finish". To Learn More About Deck Railings and Claim your 2 FREE Deck Plans, Insider Report, MP3 Audio and discover everything to know about building a deck visit: http://www.DeckBuildingRevealed.com

Building Inspections - Permits and Problems

Things to Know

1. The General Contractor or the person that the Building Permit was issued to must make all inspection requests.
2. Building Permit Cards must be posted and building plans must be available at the jobsite or the inspection will not be performed and a penalty can be charged.
3. Permit Fees are based on the valuation of project defined as labor, materials, plus profit
4. If the project is large enough a plan review will have to be completed by the building inspector

Who are They

The BDI inspects approves and issues all permits required by code for new construction and for repairs and additions to all public and private buildings. They assure safe building standards for the general safety and welfare of us all. When Do I Need a Building Permit Building permits are required when any structural change or major alteration is made or for new construction. Normal maintenance doesnt need a building permit.

Here are some common examples, although this list is not complete:
1. New structures
2. Enlargement of existing rooms
3. Porches, decks, and retaining walls
4. Anything involving structural beams, joist replacement or bearing support
5. Foundations and footing repair, underpinning or shoring up of a structure
6. The conversion of basement or attic space to living quarters
7. All new fences except the replacement of existing fences
8. An entire new roof, when roof work is not replacement of like material

When Don't I need a Building Permit

Here are some common examples, although this list is not complete:
1. Ordinary repairs to residential buildings and structures, there could be height restriction here.
2. Plaster patching, exterior and interior painting, floor sanding and refinishing, floor tile, carpeting, replacement of flooring
3. Repair or replacement of gutters and downspouts
4. Replacement or repair of exterior doors and non-fire rated interior doors whenever no modification is made to the opening
5. Wall paneling applied directly to wall surfaces; acoustical ceiling tile applied directly to ceiling surfaces;
6. Installation of battery-operated smoke detectors
7. Replacement of existing fencing, same height, material and location in the rear or side yards
8. Non-dish radio or television antennae

The BDI will focus on all common areas unless there is a specific complaint. In that case they can go anywheres in a building. They do not need an owners permission to enter a unit, but they do need the tenants permission to enter an apartment. They will look at all common areas to sleuth out dangerous or hazardous code violations or egress issues. They are essentially interested in safety issues and will look especially for fire extinguishers, doors, lighting, stairs, doors and smoke detectors. If there are any violations of code they will issue a "notice of violation" or NOV.

What They Do: They will inspect a property for three reasons:

1. Law requires general inspections to uncover and correct safety issues and code requirements. These inspections are mandated periodically.
2. Someone has complained
3. To review new construction work for safety and code violations.

The Dreaded "Task Force Inspection"

If a building is a nuisance and gets repeated complaints then the city can call in many or all the agencies and create a task force to inspect the building. The agencies involved can include fire, health, police, and the D.A. The task force is only formed for the worst offenders, generally drug dens or health hazards.

Construction Inspections

The inspector is looking to see that the work is up to code and does not exceed the scope of the permit. Very often, construction will take place and other issues come up. If they exceed the parameters of the work approved they can deny approval of the work. Now you have to come into compliance and that can mean a bureaucratic snafu or worse. A citation or NOV (Notice of Violation) is issued and you will need to apply for another permit to fix the problem to come up to code. When the work is completed according to the demands of the BDI, you will need another inspection to get cleared. If you still have problems with getting the work approved you have a few alternatives

Fighting the BDI

1. Know the code: You will need to prove the condition cited is legal
2. Get all the permit plans the DBI has and try to make a case that the condition is historical
3. If its an older building it may be grandfathered
4. Talk to the senior inspector and make an informed case
5. Talk to a real estate attorney or engineer

The Hearing

This is your last effort to right a wrong. You can have your attorney or property manager or possibly a structural engineer make your case. This is your last ditch effort to allow a condition to remain in place. Obviously, you dont get to this unless there is a lot of money at stake.

Howard Bell
yourpropertypath.com

http://www.yourpropertypath.com
We believe that knowledge should be free and freely shared.

Garage Door Repair

Sometimes, your garage door is not functioning the way it should. For simple problems, you could almost certainly do some of the fixing yourself. Here are some common garage door problems you can repair yourself:

Your garage door goes up and down by itself. No, its not the bogeyman. The explanation is actually simple there must be someone in your neighborhood that uses a security or access code similar to the one you are using. This can cause interference with your radio receiver. Radios in police cars and airplanes also have the same effect. How do you make sure this does not happen again? Simply change your code.

The process for changing a security or access code differs from one garage door opener to another. As a general rule, you just need to hold the transmitter close to the openers box and push a certain transmitter button for thirty seconds (consult your manufacturers manual to find out what button to hold down). Most openers that are new models are equipped with a rolling code that changes automatically once the transmitter is used.

Your garage door goes halfway down and back up when you try to close it. In this case, you might y be using a garage door that has a safety sensor system that detects if there is any obstruction to the door coming down and tells the machine to pull the door back up. Your door automatically opens up again when it senses any obstruction a bucket or broom, maybe. Just remove the obstruction and your door should again work perfectly.

This problem may also happen if your sensors lenses are dirty, dusty or has a condensation built up (sometimes spiders web). The system will think that something is in the way, causing the door not to close. Keep the lenses clean.

Nothing happens when you press the transmitter. If you suspect that your transmitter is not working, you may want to change the battery or look for the power source to see if it is working. If this does not fix it, your transmitter might be damaged and needs to be replaced. Call the service company.

Garage Doors provides detailed information on Garage Doors, Garage Door Openers, Garage Door Repair, Overhead Garage Doors and more. Garage Doors is affiliated with Garage Door Opener Parts.

Sunroom Installation

You need to take several things into consideration when you're thinking of a sunroom installation and there are many options to choose from. Maybe the first thing that will come to your mind is the price, but this all depends on how big you want your sunroom to be and what type of material she will be using. For example, if you want an aluminum sunroom and you're just thinking of adding a few windows, then it is going to cost you much less than if you had the entire sunroom constructed out of glass and wood. So there are a few factors that you must consider before you get started.

When building a sunroom you start with the foundation and it is impo10FFrtant to build its foundation to the building codes of your local area. These codes will vary depending what kind of climate to live in. If you have a lot of freezing during winter, then it stands to reason that the foundation has to be deeper in the ground and this will mean more expense in labor and materials. But if you have an existing patio then the expense won't be as much.

Of course the major expense in a sunroom is the number of windows that you intend to use and also the type you have in mind. For example, if you are going with fixed windows will be less expense than if you order custom installation. Another cost difference would be in the type of glaze that you choose to put on the windows. This glaze can control sunlight and block out damaging rays but keep in mind the more your windows can do the more expensive it will be. You will find a difference in the materials that you choose and this will affect costs also. The cheapest material is PVC and the next one up the line is aluminum with the most expensive being wooden material.

For lots of information on how to build a sunroom and other sunrooms related topics, visit DIY Home Advice at http://www.diyhomeadvice.com

Worthwhile Home Improvements

While most homes require minimal improvements, you will be much better off if you make the types of changes that are worth the extra investment.

Though there are no guarantees that any sort of home improvement will allow you to list your home at a higher price, some home renovations are much more worthwhile than others. While several people may decide to knock down walls and purchase designer cabinetry, others may find that basic changes are quite important. The three repairs that tend to result in a larger return include floors, roofs, and kitchens.

Let's begin with your floor. What does your floor look like? If you have wall to wall carpeting, is it in good shape? If your floors consist of hard wood, is it polished? Make sure that carpets are stain free and that wood shines brightly. However, if your floors have seen better days, it may be timABDe to replace them. Though carpet tends to be cheaper than wood, wood often sells much better. Many buyers love the look of hardwood floors throughout a home, and while you are in the selling process you can always place throw rugs on top of your wooden floors to protect them. Aside from carpet and wood, you may consider ceramic floors for some of the rooms in your home... just make sure that your tiles are not chipped, cracked, or loose. Next, turn your attention to your roof.

Believe it or not, prospective buyers will always ask about your roof. When was it last fixed? When was your roof installed? Have you had any problems with your roof? Are there any loose shingles? A new roof can be a great selling point, and this home improvement should never be overlooked. You know it (and buyers know it) - roofs are expensive to replace. Still, if your roof is in desperate need of attention, find the money and replace it. Buyers will certainly walk away from a roof that needs to be renovated. Lastly, look to the one room in the house that everyone loves to spend time in ... the kitchen.

When you think of an ideal kitchen, what sort of image comes to mind? Though your picture perfect kitchen may come with marble countertops and gleaming cabinets, it definitely does not come with chipped counters and broken down appliances. Spend a few moments staring at your existing kitchen, and decide if your counter, backsplash, cabinets, and appliances are in good shape. If not, begin repairing your kitchen, and start with the countertops. You don't have to replace an entire kitchen, just make sure that everything appears to be new and clean.

Spending a small fortune on home renovations is not necessary, but make sure your kitchen, roof, and floors are up to par. Once you create a desirable house, buyers will begin to see your home's overall appeal ... and isn't that the whole point?

Raynor James writes about a wide variety of real estate issues for FSBOAmerica.org, where you can view or list homes for sale by owner for 1 month free.

Sanding Hardwood Floors

There are certain hardwoods that are vulnerable to weather and climate changes. Some woods contract or shorten when it is hot. Others expand when there is moisture. When this happens, the floor becomes uneven. If left unchecked, it could ruin the look of the room and even become hazardous enough to cause accidents.

You do not have to take out the planks and replace them. The more practical solution is to sand them. Sanding your floor is a project that needs your dedication and time, whether you do it yourself or hire a contractor for it.

Sanding It All Away

For the initial sanding, you will need to use the coarsest sandpaper- the 20 grit. There is a sanding machine that you can use to make the whole ordeal easier and faster.

For efficiency, you will need to sand the floor at a 45 degree angle to the grain. It may take several rounds before the surface evens. It really depends on the precision of the tongue-and-grove milling of the hardwood.

Another technique is pushing and pulling the sander as it moves. The pressure is strong as it moves forward. You will need to lift the sander at an angle and apply pressure as it moves back. Continue this method until the diagonal scratches are not visible anymore. You must be careful that the traces of the sandpaper are eliminated. The slightest pattern will show after you apply a coating.

The process may take a long time. Be prepared to change the sandpaper form time to time. Stock up on 20, 36, 60, 80, and 100 grit sandpaper. For wood that is coated with aluminum oxide, use a commercially available softening solution before sanding. It may be hard to sand if you do not do this. Sandpaper also contains aluminum oxide so scratching the two surfaces against each other will take more force.

Hardwood Floors provides detailed information on Hardwood Floors, Engineered Hardwood Floors, Solid Hardwood Floors, Long-strip Hardwood Floors and more. Hardwood Floors is affiliated with Install Hardwood Flooring.

Cabinet Hardware Makes an Easy Bathroom Makeover

A quick and easy bathroom makeover would be the right thing for many of us who are bored with the old decor of our bathrooms and are ready to update. No need to fear any major restorations in the near future. There is a simpler way to make improvements without the messy work.

With a simple change of the existing bathroom accessories and cabinet hardware, you will have a totally new look to your bathroom within an hour or two.

No major changes or tools are needed except a screwdriver or drill (if you prefer) and the time it takes to decide what accessories you want and where they fit in.

Remember, the idea is to make a change, and this means that it is time to donate that toilet tissue cover to the charity of your choice and get modern.

You might find that you are amazed by all the choices available for bathroom accessories.

If your bathroom looks drab and dull and has been the same since you moved in, try brightening the room with bold colors and textures of paint.

If you had an obsession with the frog family, it might be time to change into a flower child and touch your inner peace.

For those who want a more sophisticated look, consider a lean toward a spa effect with calming16BD earthy colors.

For the romantic bathroom, reds and purples will bring about the right mood and adding a candle or two will give the right air for love. Make sure you have fun with the change and go a little wild.

To bring about the sleeker modern look, it will be necessary to give up those outdated cabinet and door fixtures. Adding themed cabinet hardware can really bring out the decor and color of the space.

If you have decided to add new paint to the cabinets or walls, adding new door or cabinet hardware can be the finishing touch you have been looking for.

Today, you can find every color, shape, and material used for the fixtures. Some of the better selling finishes are in chrome, nickel, gold, brass, pewter, and ceramic hardware.

Remember, simple is sometimes the best thing to add a touch of class. Door hardware falls under the same category as the cabinet hardware. Remember, the door fixtures will be the first thing you see when you enter so you might want to splurge here!

Things have certainly changed in the way of room decor. This means more possibilities for you to consider in your makeover. Allow your creative side to come forth and create a room that you will be proud to spend time in. Make it one you will want all your guests to see!

Whether you choose to go frilly or funky, you will be able to find bathroom accessories, door hardware, and cabinet hardware to fit. Once you are finished with your creation, run a hot bath, add some bubble bath, jump in and enjoy your new bathroom.

If bathroom remodeling is a challenge, try something easier. Change your door and cabinet hardware for a simple change. Let CKI Wholesale furnish your new cabinet hardware. Visit CKI Wholesale at http://www.ckilock.com/ to manage your makeover dreams.

Log Homes And Timber Frame Homes

Log Homes and Timber Frame Homes may have the lowest carbon footprint of any other type of construction. A carbon footprint is the measurement of carbon dioxide released as a result of using a particular product or other human activity. Carbon dioxide is the main greenhouse gas released into the atmosphere and major contributor to global warming.

A report prepared by the Edinburgh Center for Carbon Management (ECCM) compared the carbon dioxide footprints of three structures and the benefits when more timber was introduced into the construction. The results were astounding. ECCM estimated that there could be up to an 88% reduction of greenhouse gases by using log or timber structural elements wherever possible rather than other conventional building materials. The reduction of greenhouse gases was achieved by replacing materials high energy, high CO2 production values, such as steel and concrete, with solid wood. The report states that the production of steel and concrete materials accounts for 10% of the total global emissions of greenhouse gases. These materials have a high CO2 output created du100Aring the extraction of raw materials, refining, processing and manufacturing of the finished product. As reported in a study published by the Royal Australian Institute of Architects, the energy consumed to process a tree into a finished sawn timber is about one-tenth of steel production.

In another report prepared by The Consortium for Research on Renewable Industrial Materials (CORRIM) compared four different structure using different wall systems - two woods, one concrete and one steel. The report found that the steel wall system generated 33% more greenhouses gases than wood and the concrete wall generated 80% more greenhouse gases than wood. The study also reported that the wood structures out-performed the steel and concrete houses in energy use and the impact on air and water quality.

Wood walls are typically framed or solid. Conventionally framed walls use a combination a several materials including processed wood products such as plywood or other laminated wood products, fiberglass insulation, exterior siding, interior sheetrock and some type of wall covering. Solid wood walls using logs or timbers have basically one product - the log or timber. The energy consumed and the CO2 produced in the production of logs and timbers is a fraction compared to the production of all the various materials in a conventionally framed wall.

Consumers are much more aware the environmental impact of using different materials and are being increasing sensitive to the hazards of exposure to chemically processed materials. Logs and timbers are 100% natural. As a natural product, they do not emit VOCs or other pollutants into the outdoor or indoor space. Trees are produced from soil, water and air combined with the energy from the sun, in a miraculous process of photosynthesis. Ecologically and environmentally, solid wood is the only building product that is renewable, biodegradable, recyclable, energy efficient and extremely beautiful.

Sustained and plantation forest growth actually reduces greenhouse gases by consuming CO2 out of the atmosphere while the trees are growing. Political pressure to reduce carbon dioxide emissions, such as the Kyoto Protocol, is sure to continue and it will become increasingly important to find solution. The use of solid wood construction such as log homes and timber homes can make a positive contribution.

Footnotes: 1Forestry Commission Scotland Greenhouse Gas Emissions Comparison - Carbon benefits of Timber in Construction. Aug 2006. 2Wood - another low carbon footprint solution. Feb-Mar 2006, ECOS 13. 3The environmental performance of renewable building materials in the context of residential construction Perez-Garcia, John, Bruce Lippke, David Briggs, James B. Wilson, James Boyer, and Jaime Meil. - http://www.corrim.org/

Get more information on log home construction or timber frame homes

Jim Young is the president of PrecisionCraft Log Homes and presides over the Log Homes Council for the National Homebuilders Association. Jim set the stage for a full service approach to designing, producing, and building log homes with the industry's first Total Log Home Solution, which is a PrecisionCraft hallmark.

How To Wash Vinyl And Aluminum Siding

While it's not something you'll want to do too frequently (it's a fairly big job!), there are times when you will need to bite the bullet and wash your house. It does not have to be a "back-breaker" job if you pace yourself and follow a few handy tips.

Over time vinyl and aluminum siding develops mildew, oxidation or other soiling, which detracts considerably from the original crispness and freshness of new siding. Aluminum siding becomes dull; vinyl siding shows mildew spots; both get soiled from the elements.

You can restore some of the original beauty without actually breaking your back! And, depending on the size and style of your house, you might even be able to do it without climbing a ladder (ranch style houses, anyway).

The process is actually quite simple, though it takes a bit of muscle, so prepare yourself for several hours of fairly strenuous work. Plan to rest whenever you need to. Carry or have close-at-hand plenty of drinking water (drinking from the hose is not recommended). Also, work in shade whenever possible, take your time, move smoothly and methodically. Most of all, don't let the job overwhelm you! In fact, you might want to consider scheduling such a job over a two day per16D0iod to make the whole experience comfortable and more rewarding.

Instructions:

Procure a box (or carton) of TSP powder (Trisodium Phosphate) at your local hardware store or home center.
Procure a telescoping brush kit (also available at most home centers). You might want to consider the kind that attaches to your garden hose for this type of cleaning, although it isn't entirely necessary.
Read and follow all manufacturers' labels and instructions for any precautions and/or personal protective equipment recommended.
Procure recommended personal protective equipment (gloves, goggles, etc.)
Read and follow manufacturer's label instructions for mixing the TSP powder with water (for cleaning), in a bucket large enough to accept your brush-head.
If your house is a ranch style, you might not need a ladder, depending on the lay of the land around the building. If it is not a ranch, you most likely will need a ladder. Be sure to follow all recommended ladder safety guidelines (see "notes" below for related link).
From the ground and/or ladder, hose a section of the house down to rinse off surface dust, pollen, etc.

Once an area is wet, dip your brush head in the TSP/water solution and brush the siding...starting as high as you can reach with the telescoping brush. Start by working an area about 20 feet wide and work the entire height of the siding for that width if you can.

As you learn the process, you may choose to increase your working area; just try to avoid too large an area, as the cleaning solution may dry before rinsing, which can create streaks or may require repeat brushing.

Working from top to bottom, thoroughly brush the area you're working on, Use both horizontal (side-to-side) and vertical (up-and-down) motions, to ensure thoroughness.

Once you've brushed thoroughly, rinse with clean water.

Repeat this process for the entire house.

NOTES:

Always read and follow label instructions for safe handling and working with chemical products. If in doubt about a product's 'exposure' safety, request an MSDS (Material Safety Data Sheet) from the supplier.

Also, always practice safe ladder-use.

When Finishing Your Attic is the Best Choice, And When It Isn't

When trying to increase the amount of living space in a home, there are several options to consider. Remodeling or finishing an attic into needed living space is certainly one option. There are others, as well. These include finishing a basement or garage or adding onto your existing home.

The decision about how you will add living space must factor in such considerations as cost, available space to place an addition, the intended use of the space, and the ability to provide appropriate access to the new area. You will need to think through each of these considerations in making a decision.

In considering cost, the critical points to review are these:

If you work with an existing space (basement, attic, garage) you should not incur the expense of a roof, exterior walls, or foundation, unlike a traditional addition or 2nd story, which may need a foundation, several exterior walls, and a foor

You should consider the return on your investment. If you can add a room, bathroom or other living space that increases your home at a small expense, it is likely to give you one of the highest rates of return.

Is it reasonable to include an 1161additional bathroom? Adding a bathroom will increase the value of your home, but you must consider the costs incurred in building it. For example, will construction of a bathroom in an attic require reinforcement of the walls to support the weight?

If you wish to do the work yourself, are you better prepared to finish an existing space or build an addition? Do you know enough about insulating and wiring a attic or a basement?

What are the implications of your choice in terms of the adequacy of your current heating and cooling system? Will you need new ductwork or an auxiliary furnace or AC unit?

You can get an instant online estimate for finishing your attic at http://www.remodelestimates.com/calculators/intor.cfm?ver=21.

The next question is whether there is space for an addition to your home. Here are some questions to consider:

Will local building codes and zoning laws allow an addition?

How much yard will you have left after you build the addition?

Will local building codes and zoning laws allow the type of addition you are planning and the type of materials you plan to use?

How will you provide access from the existing structure into the new living space? How much change to the existing structure will be required?

The intended use of the new space might argue against a particular choice. For example, if you plan to use the new space as a home office, you might need to consider such things as:

Will you need external access to the space?

How much heavy equipment will be placed in the area? Will that weight require reinforcement of the floors or walls?

Alternatively, if the space is to be used as a bedroom or playroom, you should consider such things as:

Are there special accessibility issues (for example, someone with a disability or an aging parent)?

Do you need to add a bathroom, or is another bathroom close enough?

How will you provide adequate lighting (for example, adding a gable or a skylight)?

Does your basement offer a dry enough environment?

Finally, you will need to understand and accommodate access issues. A few of the more critical questions to consider are these:

Do local building codes require more than one means of access or egress from the room?

Can you plan for emergency escape?

How will you ensure adequate ventilation?

How much change to the existing home will be required in order to provide access to the new living space?

These are some of the major questions to consider when deciding whether finishing an attic is the best choice for your home and your family. By taking these factors into consideration you can evaluate whether finishing an attic is the best decision for your family and your current home. By calculating the cost, considering modifications to your existing home and yard, how the new space will be used, and what other changes are required to provide access, you can make a wise decision. If you are considering an attic remodel, I strongly recommend reviewing the Attic Remodeling Workbook available at www.amazon.com to ensure that you understand the complexities and challenges involved.

Attic Remodeling is very likely to be the solution to your need for additional space. These questions will help you ask the most important questions and make a wise decision.

Dan Fritschen, the author of this article, is the founder of the websites
http://www.remodelormove.com
http://www.remodelestimates.com and
http://www.remodelingorganizer.com

He is the author of three books on home remodeling.

Shower Tile Designs

Ideas to help you create beautiful bath and shower tile designs.

One of the wonderful things about tile is the fact you have almost unlimited creativity. There are many types of tile and different ways to create your own unique bath and shower tile designs. From standard bulk tile to individually hand painted, no matter what your decorative style, youll still have many choices.

Before creating bath and shower tile designs, you must choose your pattern and tiles you want. When using tile to create designs there are three kinds of tiles you can use. There are field tiles, which are simple in shape. These come in many sizes and are great to use when covering a large area. The next tiles are the accent tiles. These tiles are designed with unusual shapes, sheens and textures. All it takes is a few of these to turn an ordinary tile pattern into something extraordinary. Last, the trim tiles are your border tiles. These are typically narrow and go around the edge to add to your design.

Tips for choosing bath and shower tile designs:

• Light airy tile choices make your room look larger. For a stronger effect use contrasting accent tile colors.
• Consider the entire color scheme of the room including counters, floors, and walls. Adjust your tile creation to create focal points or to compliment.
• Using two or three colors can create subtle, yet very effective results.
• Add color to your tile choice by using randomly spaced contrasting tiles.

Bath and Shower Tile Designs

Another important bath and shower tile design element is the grout color choice. The wide array of1114 grout color will make your patterns come together with a matching or contrasting color. When you choose a high contrast color of grout to the tile it becomes more visible. Contrasting a white grout with black tile will contract for a checkered look giving you a little extra design. It is also important for grout to be cleaned with warm soapy water and re-sealed often in regularly used areas.

Dont be afraid to be creative as you choose your bath and shower tile designs. The result will be a uniquely beautiful bathroom youll enjoy for years.

This article was written by Gregg Hicks of http://www.reliableremodeler.com which provides Internet-based home improvement information and services. Offering homeowners a simple, quick, and free way to access, qualified home improvement remodeling contractors.

Women Love Them And So Do Men

Your bathroom vanity cabinet can be one of the nicest additions to your bathroom. Whether it is to be used primarily by only one person or by a number of people, your choice in style and set-up can be a lovely enhancement to one of the most frequently used rooms in your home.

One of the most essential features on a vanity cabinet for the lady in your home is the lighted make-up mirror. Although some vanity cabinets do not contain this feature, it is ideal for women and teenaged girls. A lighted make-up mirror is designed with a variety of optional lights, so that cosmetics can be applied in the lighting which best resembles the lighting in which the person will be wearing them.

Lighting Up

A lighted vanity mirror is not only for women, however; it is also quite useful for men when shaving. These mirrors provide much better lighting for this process than the plain overhead lighting that is already in most bathrooms. All you need to do is switch the lighting to the form which is best for your specific needs.

While vanity cabinets look very nice when they display perfume bottles and other such items, you can give your bathroom a much more pleasant appearance by choosing a bathroom vanity cabinet which has enough drawer space for the women's cosmetic collections and the men's shaving supplies. If the cabinet you choose also has small shelving, this will also help keep your bathroom better organized with cans of shaving cream, hair spray, and other larger items which do not fit as neatly in the drawers.

Selection Of Material

You can select a vanity cabinet in a nice wood tone that will highlight your bathroom; or, if you prefer, you can find one in wicker or metal materials. Whichever style best suits your own personal tastes, you can keep your cabinet neat and clean by lining the drawers and shelves with colorful shelf-lining paper.

In addition to enhancing the appearance of your cabinet, this will also help to preserve its quality, as it will keep spills and other residue from ruining your cabinet. Shelf-lining paper, which can also be found in moisture-resistant material, is available in an almost limitless variety of designs and colors, so you will be able to easily find the exact style which suits your individual preferences.

Wall Mount

You also have the choice between a wall-mounted vanity cabinet and the larger style which often includes a small stool or other seating designed to make applying cosmetics and other grooming easier and more comfortable. Depending on both the size of your room and the needs of those who will be using it, you can select whichever style is most appropriate for you.

Even if you have a very small bathroom, it is not necessary to do without this all-important furnishing, as you can find a size that is suitable. As you can see, there are a number of practical uses for bathroom vanity cabinets; the one you choose can be both practical and tasteful in appearance at the same time.

Ernest Jarquio is a successful Webmaster and publisher of Bathrooms-And-Showers.com. He provides more resources on topics such as Delta bathroom faucets, bathroom remodelers and natural bath salts that you can research on his website even while lounging in your living room.

Home Renovation - A Profound Display of Your Skills

Home improvement increases property value, provides a more secure and comfortable home, displays your vibrant personality perfectly, and offers a big appreciation in the long run. It is important to evaluate the condition of your home and ensure that you make the necessary home improvements in a timely fashion in order to prevent any damage. Hence, home improvement plans should be implemented every year.

The renovation may be small scaled or large scaled depending upon your capacity to afford the expenses. Finances are the main reason why people postpone home improvement projects. There are some easy ways available in the UK financial market through which you can obtain the desired money for your home improvement plan.

Loans available in the UK financial market for renovation purposes can be used for a variety of projects, whether it is redecorating the house or adding another room and so on. The lenders know that renovation is purely personal and taste specific, and hence, they do not interfere in the manner of expending the loan amount.

You can get the required amount for renovation with and without pledging your residential property as security. The terms and conditions of loan plans vary accordingly. When getting renovation loan of secured category, the house, as well as the planned improvements are used as security against the loan amount. The value of your home is determined according to market prices and the loan amount depends upon the equity in the pledged security.

Homeowner loans also suit renovation purposes as these loans are secured and can offer you the required amount when you are going for a large scale renovation. The first step in applying for such loan plans is to figure out what improvements you want to make and how much that renovation will cost. You can get a rough idea regarding the expenditure by visiting different home supply stores and talking to separate contractors. Once you are aware about the expenditure, you can fill the online loan application form and go for that loan plan which suits the purpose cost-effectively.

When your requirements are small like whitewashing, painting or purchasing furniture, you can opt for home improvement loans of unsecured type. These loans are free from residential property security requirement and can offer you upto 25,000 pounds at a competitive rate of interest. Both the loan plans come with easy repayment options and you are advised to opt for a loan plan according to your requirements and repayment capacity.

About The Author: For more information about home improvement lo2E6ans and Homeowner loans Please visit our website: http://www.longdogfinance.co.uk/

Renovating your Ranch House to Make a Better Impression

Many people simply think that ranch houses are just a simple floor on a single level. To make this home unique they may spend time landscaping the gardens. However it is also possible to make your home unique by renovating it, there are a number of ranch house renovations that can make your home beautiful and more functional. Before you start renovating your home, you must bear some important things in mind.

Most ranch houses have a kitchen, a couple of bedrooms, 2 bathrooms and a living room. Typical houses have a full sized basement and some have attached garages. Renovating your ranch house doesn't have to be difficult, in fact simple things can make a whole lot of difference to your house. Something as simple as adding a nice porch to your property would be considered an improvement, you could also go down the route of partitioning the basement space.

Before you decide exactly how you want to renovate your house, you should first decide what you intend to achieve. There must be a reason for you wanting to improve your house, so what are they? Just have a think and see what you would like from your house. Perhaps if you always get soaking wet when opening the door a porch would be a great help. No matter what you are planning, it's important to understand why you're doing it so you can achieve the correct results.

Add extra space to your home

If you are pleased with the overall appearance of your ranch house then you may simply want to add extra space inside your home. Your family may of expanded, and so you may require extra bedrooms. Many people also want to add study's in their home so that they can work without making a mess! Whatever you intend to do, you should find a way of achieving it. You could consider separating the basement using wall partitions to create more useable rooms.

Many peoples basement is basically a storage room, like a massive kitchen cabinet, and a place to stick the furnace, dryer, washing machine and boiler. If you build walls and separate this space then you can create some useable space by hiding these from view. You could create a number of different rooms in your basement using more than one divider, these basement rooms may provide a great place for study, or even for parties!

The columnist Rob Carlton is especially interested in topics dealing with decorating and home decor. His comments on kitchen cabinet plans can be discovered on his webpage as well as other online sites.

Laying Karndean Flooring

Karndean flooring is fully synthetic vinyl flooring that comes in tile and plank sizes not sheets as other traditional styles of vinyl do.

It comes in a variety of designs that mimic perfectly other traditional floor finishes such as timber, stone, and slate. This type is a perfect solution for people who want to use a particular floor finish in an area in which the actual product would be unsuitable such as a timber floor in a bathroom for example.

It is very versatile as it can be laid over all floor surfaces, wood, tile, asphalt, concrete even existing vinyl. Pdf files are available for download which will advise you on the correct preparation of your floor (this is especially useful for unusual subfloor materials such as asphalt and for new concrete floors that may still have high moisture content.)

This guide will discuss the general principals involved in laying Karndean flooring on a subfloor of aged concrete, wood, vinyl etc.

If you are going to lay your Karndean flooring on a more unusual subfloor it is highly advisable that you consult a guide for the specific preparation and adhesive requirements of your subfloor.

Laying this particular flooring is a fairly easy operation that is well within the ability of the average DIY person. As with any flooring installation, the correct preparation of the su5B4b floor is essential. You must ensure that your floor is clean, flat and level and that there are no lumps, bumps, and grit or sharp objects. Anything that is on the subfloor will show under the Karndean flooring and will cause damage. Floors that are uneven will be highlighted by light entering through doors or windows.

Firstly prepare your subfloor, for timber floors it is advisable to lay plywood sheeting that is well fixed to the timber floor and has the joints filled with a fine finishing compound, concrete floors can either have plywood sheeting laid and secured to them or a fine screed can be applied to give a flat surface. (The screed will not totally level the surface however.)

Before you commence to lay the Karndean tiles or planks allow them to acclimatise to the room for at least 24 hours. Unpack the flooring and leave to sit in the room - this will avoid the planks or tiles expanding or contracting after they have been laid.

Karndean supply several different adhesives to suit the different subfloor materials, choose the correct adhesive for your subfloor. Spread the adhesive onto the floor using the trowel that comes attached to the adhesive container. Ensure that you spread the adhesive on a manageable area to ensure that it does not go off before you have been able to lay your tiles or planks.

Once you have laid the flooring roll and cross roll the entire floor with a 100lb roller. Check again in 2506 to 3 hours and reroll if necessary (or if recommended on the adhesive container.) Do not walk on, wash or polish the floor for the amount of time recommended for the adhesive you used.

Kardean flooring is a solution that gives you the look of timber, stone or other flooring materials but that will not warp, chip or be affected by heat and humidity as the natural products may.

Derek Rogers is a freelance writer who represents a number of UK businesses. For vinyl flooring, he recommends Completely Flooring, one of the UK's leading suppliers of Karndean Flooring.

Install Laminate Flooring

The first thing to remember is that tools can be dangerous and should not be thrown at one another. We did not actually throw any tools at each other. And we had been married long enough when we installed our laminate flooring to know that yelling at each other gets us no where. But there were some tense moments. We were fortunate that our only real injuries were an assortment of aches and pains in new and not so interesting places.

Have a plan. The flooring we selected was not wood grain. It looks like tile and has a very strong pattern. That was our fir5B4st mistake. With a wood look alike, it does not so much matter where you begin and end.

If your laminate has a strong pattern, take a good look at the room and decide what the focal points are and how you want the pattern to look in those areas. Also, you might want to measure the room and figure out how many planks across it is. You will want to hide any thin pieces behind furniture. Also, do not just stagger the planks as a brick layer staggers bricks. Sometimes you will come up to an end wall and have just a little sliver of the end of a plank to put down. These will not stay in place well and you end us saying things to your spouse like, It was your job to keep that in mind and What do you mean it was my job, you never told me that. Then he tries to make it better with a compliment, Well, youre the one with the good memory. So each time you begin a run, check to see how it will end and adjust the starting plank by trimming the starting end that butts up to the wall appropriately.

If you will be laying laminate in more than one room, as we did, and these rooms connect, give some thought to how you will want the transition to look. There are threshold pieces that allow you to stop and start up again in a new room as long as the pattern is not definite. We had to blend everything together and I have to tell you that going around corners gave us fits. You have never heard so much cursing. If you ha5B4ve to go around corners, have lots of paper handy. Large sheets are best. Make templates. A good rule of thumb for the whole project is to measure twice and cut once. Even so a lot of exasperated groaning will occur. Do save the pieces you cut incorrectly, you may be able to use them later. Do not try to work on your floor after you have put in a long day at your paying job. That is when we made the most errors. But we did not have much choice about it because our days off did not have much in common.

Once you have figured out how you want it to look (remember to maintain some flexibility on this issue), it is time to take a really good look at your floor. If your house is built on a concrete foundation, most likely your floor is nice and level. Sing Hallelujah. Ours was not. Our house is built on a raised foundation and there was a sizable drop off from the kitchen to the dining area, from the kitchen to the nook and a good dip in the living room. These had to be leveled before we could begin putting down the flooring. Pray that your floor is level.

There are a number of products made just for this purpose. They are supposed to be self leveling. Right. It is not always good to follow the directions. But this is my natural tendency. As my husband finally figured out, it is better if the leveling compound is thinner than recommended than the other way around. My penance was to do a lot of sanding. Drywall sanding sheet5B4s worked best for me. Avoid this step if you possibly can. Believe me, if your floor is not level, it is best to just live with no carpeting or whatever for a while than to begin and figure that you will level it as you go along. That dip in the living room that I mentioned, well, it was very late one night and we just wanted to finish the living room. We went right over the dip without thinking. Luckily, laminate flooring is somewhat flexible and the dip is not too extreme. But do not believe it when the salesperson tells you how flexible it is, its not as flexible as they say. We try not to walk over that spot too much.

If you do not have a nice big truck, have the flooring delivered. Do not try to get it home in your Jeep Cherokee, especially if the store is more than a few minutes from your home and you have to make several trips. That was so not fun. Buy more flooring than you will need to cover all your floors. The exact amount extra you will need depends on how many mistakes you will make and how strong a pattern you are working with. The more definite the pattern, the more extra you will need. Luckily for us, the new batch that we had to order matched the old batch nicely enough.

There are a number of special tools the salesperson will want to sell to you. Buy them. That way you will not have to go back later and get them anyway. We used a circular saw to do the simple trims on the planks. Buy several replacement 5B4blades ahead of time. Laminate flooring is really tough and just eats up your blades. For the fancy cuts around corners and such we used one of those rotating plunge cutters/saws. My husband could tell you the name of it. I love my jewelry making tools and can name them all. That I can not name all other tools appropriately is not a defect on my part.

We sacrificed our garage for a time and parked our cars outside. We set up the garage as our workshop. That meant we did not have to bring all our tools in from outside each time we stopped working on the floor. You do not want to cut the flooring indoors. The dust that is created is phenomenal. Be sure to close the door from your house to your garage before you start cutting. Even then, you will have to wipe down your walls afterwards. Cover your furniture with drop cloths. I really wish someone had told us that.

We also made a cutting table from a large piece of plywood and saw horses. Make sure the horses are stable and level. Temporarily attach the plywood to the horses with screws. On one long side of the table, screw down two 2x4s parallel to each other along the full length about five inches apart. This makes the long cuts along the length of the planks easier. Wear eye and hearing protection while cutting. Seriously.

For the rest of it, just follow the directions (especially the one about the spacing between walls and flooring. Oh yeah.). And yes, I know what I3DC said about directions earlier. We love our laminate floor. We are glad that we did it. You will be too.

http://www.syzygyjewelry.com

Obtaining a Home Improvement Estimate

When you are unsure what a home improvement repair or project will cost because you have never done anything similar before you can ask for a home improvement estimate. Your estimate will be a guide as to what the entire project may cost and is a great way to figure out how many dollars you will need to find to remodel a room.

A home improvement estimate will cost the project based on the dimensions of your room. You will need to be specific about the materials you wish to use and the finished look that you are trying to achieve. Your consultant will inform you of any contractor markups that you may be responsible for and the estimate will take into account regional pricing differences.

These costs come from researchers who compile the material costs by contacting hundreds of lumDBDberyards throughout the United States. The labor costs are compiled by tracking the labor trends and collecting data from professional remodeling contractors who use the pricing service.

When you are obtaining your estimate, the costs are collected from many different regions. These costs are used to determine the price of your project and are specific to your job. This information is combined with knowledge of the area that you live in, all of which assists with your home improvement estimate. The closer they are, the easier it is to get your items.

The price you get during a home improvement estimate is based on the information you provide to the consultant. This is a good indication of what your project will cost, but your actual price may vary. When you decide on a contractor, they will be able to take accurate measurements and flesh out the details you have already received. Other factors can impact the final price of your project as well. Things like access to the work area, unusual terrain, scheduling, seasonal conditions, etc.

Most of the items in your estimate will be quoted at retail price. This is what you would pay if you bought these items from a retail store. This way you get a better idea what the style and quality of the product is you are specifying. Appliances are an excellent example of something you would buy from a retailer. All of these considerations will be taken into account with your home improvement estimate.

If you want to cut down on the cost of your project take a look at the jobs that you can do yourself. There will always be jobs that you can do on your own without having to pay someone else. Find a good home improvement repair book and follow the instructions. Start with smaller jobs like painting and slowly build your handyman proficiency, and this alone can cut the cost of your home improvement by half, if not more.

Timing Your Remodeling Project For A Better Price

Are you looking for materials for a new deck, for example? Try waiting until the fall instead of buying in the spring. As winter approaches there are fewer people putting in decks, which means that you may get your materials more cheaply in October than you can in April. Also, if you can wait for the holiday sales to buy you can often save a lot. Memorial Day and Labor Day holidays are typically good times to buy remodeling materials. With a little attention to the sales you can dramatically reduce your home improvement estimate.

Alison Stevens is an online author and maintains The Home Improvement Website to assist homeowners with home improvement tips and information.

Spray Foam Insulation is The Wise Choice for Your Home or Business

In recent years, all the world has started to focus on energy conservation, and getting the most out of reusable products. In addition to the various hybrid cars, energy efficient appliances, light bulbs, and such, you can include spray foam insulation.

This kind of insulation offers multiple features for the environmentally (and economically) aware. Spray foam is a green, cost effective and safe material to install in your home or business.

Spray foam is made from agriculturally based materials that are naturally occurring. It also contains one of the highest levels of reusable materials, making it environmentally friendly even when you're ready to dispose of it.

Energy efficiency is another attractive feature. Because of the nature of the materials and the means of application, the spray foam creates an air tight seal between the walls. This translates to heating and cooling savings for your home or business. When applied, the insulator fills every nook and cranny, keeping the elements where they belong - outside.

Not only does it save you money on the monthly bills, it can save you up to $500 dollars at tax time. Of course, there are cer16A4tain requirements, including the quality of the foam, warranties and documentation by the manufacturer, but when you consider to those tax savings, getting the paperwork isn't such a big deal.

Yet another way you can save with this type of insulator is on installation itself. It's so simple to apply, that you can rent equipment and do it yourself. Even if you hire out, the application is relatively quick and easy, saving the contractor time on the job.

One of the most important features about the spray foam insulation is how household safe it is. Because of the composition of the materials, it provides no nutritional value to rodents or vermin, nor does it allow or support mold growth. Beyond that, your insulation can function as an effective part of a fire prevention system.

The foam is fire resistant. When combined with proper alarm devices and safety plans, it can contribute to the safety of your building and whoever's inside. The material's been tested in industry standard fire trials, and stands up better than most to sustained fires. It just doesn't catch fire like some materials can. That definitely brings peace of mind.

Whether you're remodeling or starting fresh, spray foam insulation is a wise choice for your insulating needs. It's environmentally friendly, and lends itself easily to the big job of making existing structures green. It's a money saver on both monthly bills and tax time. And finally, it protects your structure from nasty things like mold and vermin, while offering a moderate level of fire safety (when combined with an appropriate monitoring and safety system).

Going green in the 21st century shouldn't be a hassle. With spray foam insulation, you can turn your home or business into an eco-friendly site. The savings you get from the energy efficiency and quick application makes this a wise choice to suit your building needs.

If you're thinking of going green on your home or business, spray foam insulation is a great choice. It offers eco-friendly materials, energy efficiency and safety from a variety of typical problems. For an idea of what the insulation can offer, visit Apex Foam today. http://www.apexfoam.com

Small Bathroom Designs

Homeowners need not stress over small bathroom designs. Although the space element may be limited, there are several creative ways to maximize what you have. Here are some top ideas for small bathrooms.

Pick Light Colors

The color of your bath is crucial to creating great first impressions. Small bathrooms should always avoid dark, heavy colors. These can make your bath seem both assuming and smaller than it is. Light, pastel colors on the other hand with small designs are perfect. These colors create the impression of spaciousness. These are also the colors that can make any room fell fresh, airy and relaxing. Mix and match pastel colors for your floor, walls, cabinets and fixtures.

Use Corner and Overhead Spaces

Make use of unused spaces. The key is to make the most out of these small unused areas. You could for example push your bath tub and toilet to the wall to ensure that no remaining unused space at the back remains. You can also use corners for a hanging sink and a corner shower booth. Overhead spaces can still accommodate cabinets, hamper hooks and racks. As much as possible, keep the floor space free except for your tub, shower stall and toilet.

Choose Smaller Bath Items

Pick out small items and bathroom accessories. Bath fixtures don't come in single sizes. If you do not have a family of giants, then you can settle for a smaller toilet, bathtub and sink. Do make sure though that you have fixtures that you are comfortable using. Consult the biggest member of your family when picking the smallest possible fixture available.

Use Mirrors

All bathrooms need mirrors. Small bathrooms would look perfect with unadorned mirrors. Extremely small bathrooms might have to do with small round mirrors. Small baths though that aren't exactly too cramped could use wide mirrors that stretch across walls. It may not be obvious to some but mirrors are design accents that are more than just functional. These reflective surfaces will help make your bathroom seem larger.

Get Lights and Windows

Aside from mirrors, lights also help extend the perception of space. As much as possible, natural light sources should be preferred over artificial ones. Windows over bathtubs or overhead openings bring in not just light but a breath of fresh air.

Use night lights wisely. Opt for generous light fixtures that aren't just limited to the center of the room. Attach dimmers so you can adjust light options when you are in the mood for subdued lights.

Think Minimal

Limit your bathroom items and accessories. As much as possible, stick to only the essential items that a bathroom should have. Move magazine racks, extra cabinets, excess hampers and towel racks from the bathroom.

Small bathroom designs may require your creativity. With a little imagination, you can easily convert a small bathroom into the dream haven you have always wanted.

Find the latest in small bathroom designs. Read more about bathroom remodeling ideas.

Asian Bathroom Design

For most homes, Asian bathroom design consists of lights, mainly overhead lamps and sconce that add a unique flare. Although fluorescent lamps are part of the lighting fixtures, they often use soft-glow types that give off a cooler light rather than incandescent bulbs.

The main layout for the bathroom was inspired from most American and European designs, added to a more Asian flair that would call their own. Screens and more vibrant colors when it comes to the floor tiles and walls gives off an optical illusion of having more room. Although some Asian bathroom designs would resemble a 4-star hotel in terms of modern elegance, the very essence of the design is simply derived from 5B4nature. Some flora is introduced, while waterproof wallpaper with bamboo prints give color to the walls. This can also include wood tiles and mahogany from other Asian countries for the counter top and a small armoire.

The main shower area and tub are designed depending on the country of origin, which can be circular like the Japanese or wide like the Chinese. Of course the rich would introduce a small above-ground pool for the main purpose of soaking in hot water, as well as lavish it off with some orchids to create a more natural look. With the mixture of both modern and classic, most modern jet-streamed tubs are placed in a central location, according to the feng shui belief that the center is the very heart that revolves around everything.

Simple fixtures, mainly of faucets, shower heads and booths may sometimes be imported, while designs from local bathroom designers are inspired by using the available floor space of a typical Asian home. This is well suited for small bathrooms that upon entering would have everything within arm's reach without too much clutter. For the wall to place a mirror to, they can be large, considering the vanity of most Asians and how they can be conscious about their looks.

Decoration is revolved mainly of plants, with some wood for frames and screens and a large portion is concentrated simply for the floor. Tiles sold in Asia have several patterns, which custom made ones can be ordered 4EClike that of a jigsaw puzzle, to create a mosaic effect.

Although a number of American homes may have a touch of European and American styles, the Asian bathroom dcor is becoming a big hit, considering the need to have a bathroom with all the necessary items and fixtures without walking too much. The Asian bathroom design is for those with small homes, yet emphasizes mainly on the bathroom as the centerpiece.

For more bathroom design ideas, visit http://www.bathroomdesignideas101.com

An Overview Of Modern Architectural Design

In the world of architectural design, there are some relatively new concepts that have emerged as consumers want more choices for their buildings and homes. Architectural style continues to grow as the world changes. People, or at least some individuals, want modern and technologically advanced buildings furnished with an int2238erior design that rivals a scene right out of the Jetsons cartoon.

Architects must stay on top of growing trends if they want to continue doing business in this fast paced world. Staying abreast of technological advances, protecting the environment, and all the while saving money, are the key ingredients to the good life in architecture.

Of course, all students of architecture are familiar with the new modern styles of design. Instead of the classical arches and intricate decorating of the classical and medieval periods, the modern works feature clean lines and a lack of the well-known detail that marked their predecessor's ideas of architectural design. A great example of a modern form at its best is Fallingwaters by Frank Lloyd Wright, in Pennsylvania. He has other well known architectural designs but this one seems to be the one most copied and admired for homes.

Architects are also turning green. No, they are not turning into the incredible hulk. They are designing "green" homes and buildings that conserve energy and help save our Earth's natural resources. Many of the structural components are made from recycled materials and are environmentally friendly. They require less upkeep and energy to run. Solar panels are installed to help with heating and cooling costs.

Architectural design has left the medieval age of design and has embraced the sleek lines of steel and concrete into the urban jungle. Concrete is the new tile and the old Formica countertops in homes are now stainless steel that reflect the beauty of the polished silver beams stretched out across the ceiling.

As technology moves forward, so too will the design styles of architects. There will be a greater abundance of students studying Modern and Green architecture across the world.

A free architecture audio gift awaits you at our portal site, where you can enrich your knowledge further about architectural design. Your comment is much appreciated at our modern architecture blog.

All About Bathroom Interior Design

Althoug1C83h similar to interior decorating, interior design takes it a step further because it relates to not only the way a room looks, but also the way the space is utilized. No where in the home is this more important than when it comes to bathroom interior design. Here's a look at some of your different options when it comes to interior design of the bathroom.

The Tub

One of the most important points to consider in bathroom interior design is your family's needs. Are you limited on space in your bathroom? If so, then an interior designer may advise replacing the bathtub with something smaller like a shower stall instead. This takes up less space and creates extra room for other things. Now, if you are someone who enjoys taking a bath, the interior design of the bathroom can always take this into account and include a larger tub. They will simply add in the bigger tub and make changes in other areas.

The Vanity And Sink

The sink is another area to take into account with any bathroom interior design. Today, we see many homes that feature a stand alone sink instead of a large vanity. While that opens up the bathroom, it also can bring in a problem with storage space. So, an interior designer will look for ways to design and incorporate shelf space that will be needed.

The Toilet

Although this is not a huge area of concern with any bathroom interior design it may need changing. Due to the fact that design is not only about what is in the bathroom, but also in how it is positioned, you may see it moved or changed.

The interior designer will take all of the features and measurements and use software to come up with several designs. This software does it all and even allows you to see various color schemes and how it all fits together. When finished, you will have the bathroom you've always dreamed of. Bathroom interior design will not only improve the amount of space in any bathroom, but it will also give your home increased value in the future.

By the way, you can find out more about Bathroom Interior Design as well as much more information on everything to do with interior design at http://www.InteriorDesignA-Z.com

See What Your Home Remodel Will Look Like Before You Invest

A problem faced by anyone contemplating home improvements, interior decorating, landscaping, or a major remodel of their home with the addition of a second story or a new room is what will the project look like after it is completed.

Technology has now come to the aid of professionals, home handymen, and women by providing software packages that perform and display all aspects of home improvement, decorating, landscaping and even a total remodel of a home.

For the interior designer or decorator these software programs allow you to drag and drop images of interior furnishings such as chairs, tables, sofas, lamps, and buffets. You can even hang pictures on walls and change the flooring. Do you want to know how the room would look if the colors were different? One click and you can see the room in any color you desire. Change window coverings from blinds to drapes, add a chandelier in the dining room, or change your kitchen appliances from white to black and then to silver.

The programs are so detailed that you can see different fabric choices on sofas and the throw pillows that accompany them.

You can see where shadows will appear depending on the style of light fixture that you choose.

Will French doors suit the entry to the family room? Its an expensive exercise to install them and then determine that they do not work with the rest of the dcor. With the software programs available you can add the French doors before you invest!

Will a 20 x 30 foot deck look ridiculous on the back of your home? Will there be enough room for a swing-set and sandbox for the kids if you add a water feature to your landscaping? Should the fence be painted white or left natural? All of these questions can be easily answered by doing your landscaping in virtual 3D reality.

Having a problem visualizing whether your new second story addition would look better with a shingled gable roof or a metal or clay tile mansard design? With the software programs, you can change roof design and/or materials with a click or your mouse.

Homeowners spend tens of thousands of dollars remodeling a kitchen or bathroom and never really know how it will appear until it is completed. Now you can make major or minor modifications to any design without cost.

And, to make viewing your proposed changes ultra convenient the software provides you with 3D viewing, which means you can literally see the room from any angle you choose. How would the room look if you are sitting on the sofa or standing at the entry or in front of the window click your mouse and see what others will see!

There are two basic types of design and planning software available:

1. Software that your purchase and own, that will reside on your computer, in a similar manner to any other computer program.
2. Software that you pay a monthly or yearly service fee, that resides on a companys remote computer server that you manipulate via your computer.

There are advantages and disadvantages to both products.

Additional information on design software. Home improvement, remodel and landscaping information.

American Country House Plan - Americana Decor from Wall to Wall

The American country house plan is a fairly modern term used to express a variety of different elemental structural or design themes which give rise to the feel of years gone by. The charm of a country home can be as simple as a summer cottage or as formal and elegant as a multi-story, columned estate.

A smaller American country house plan can feature a stucco exterior with stone and shingles to create the cozy warmth of a cottage. Add a series of hip roofs, a central fireplace and brick facade to lend an English elegance to the home. A glass or screened in sun room would be an impressive addition.

For the larger American country house plan, some inclusions to be considered are a walkout basement Foundation, open living spaces with the main entry giving way directly into the great room, or a secluded master suite with a terrace and a spa. Matchstick details and horizontal siding give a more sophisticated country flavor and don't forget to add a fireplace to the great room.

You can also add a country flavor to a ranch house with just a few well placed details such as dormer windows, a tray ceiling, central fireplace and enclosed sun room. The feel of a country manor estate can be captured with a drive court leading to private parking in a multi-car garage and separate guest house. Internal elements such as angled walls and sculptured ceilings can also add to the impression of an affluent country barron's home.

Many home styles can be turned into a country house floor plan as long as you pay attention to the architectural design. From shutters and planter boxes, to ornate woodworking and sweeping verandas, deciding what architectural and design elements give your family the country feeling is the most important factor in planning your American country house plan.

Get fantastic ideas for your new house! Country house floor plans come in all shapes and sizes. Find the right house floor plan for your family today!

Bathroom Tile Ideas That Will Spark Your Imagination

Bathrooms today are not limited in their tile choices to plain white, square, glazed ceramic tiles as they used to be. Today, there are literally thousands of different styles and sizes of bathroom tile ideas and choices. Ceramic is not the only material, either. Tiles are now readily available in travertine, sandstone, or marble just to name a few.

Tiles also come in a variety of sizes, which when pieced together can create quite a unique look. You can choose to tile the entire wall from floor to ceiling with both the same color and type of tile. Another option is to mix it up and have one color of tile on the bottom of the wall and another color towards the top separated by narrow, textured tile pieces that act as a chair rail.

Not only are there are thousands of different types of tiles, but there are dozens of colors of tile grout. This added versatility means that you could use the same tile on the floor as on the walls, but by changing the color of the grout, you can achieve two completely different effects.

Try to be unique when choosing the color and style of your tile, but remember that if you plan on selling your home in the next few years, you will want to create a room that is universally appealing. Since tile work is considered a more permanent dcor, prospective homebuyers may be overwhelmed with the idea of having to replace an entire bathroom's tile work if you have chosen tiles in your favorite colors of pink and purple.

Another area that you can add some tile work to is the countertop. By adding tile here as well as the walls and floor, you can achieve a room that looks elegant and well put together. Choose tile in complementary colors, but vary the textures and the sizes of the tiles to please the eye and to add different layers.

Tiles make a wonderful choice for bathrooms because they are easily cleaned and sanitized and they are very hard to scratch or chip. If the proper cleaning products are used on them, they will remain shiny and new looking for decades. Try to choose colors and styles of tile that will serve as a great background and tiles that will allow you to change your bathroom dcor without having to replace the tile. Don't be afraid of creating patterns or designs with contrasting colors or even tiles that are subtly different.

Every bathroom is different and will have different tile laying challenges. You can get thousands of bathroom tile ideas from searching through pictures on the Internet or from the countless home improvement books and magazines that are offered. You are sure to be able to find a look that will fit perfectly into your bathroom's dcor.

For more inspiration and ideas for remodeling your bathroom try visiting http://remodelingabathroomguide.com, a popular bathroom remodeling website that includes tips on selecting the best remodeling contractor for your bathroom remodeling job.

Water-Flood Damage Information and Tips

Water and Flood Damage Information For Your Property

Water damages requires immediate attention to minimize further losses. In case a water damage occurs in your home or property try to locate the problem. By doing so you can help prevent further damages. Examples are turning off the water line for faucet,washing machine or dishwasher.Call a plumber to report a leak for service and report the damage to your Insurance Company. Your insurance adjusters will guide you through the process and will give you advices on what to do. Then move Items in advance such as furnitures, boxes, clothes, beds, etc. to a room which is unaffected. The basic idea here is to Move and Protect your personal belongings and documents. Standing water and wet materials are a breeding ground for microorganisms, such as viruses, bacteria, and mold.
"Allow molds to grow on home and or a building, materials that are soaked wet for more than 24 hours, and in "48 hours of wetness, the deadly toxic mold Stachybotrys can begin growing in the damaged areas." This is a fact and documented by mold experts.

Water Damage Tips

*Remove as much excess water as possible by mopping the area or using a wet/dry vacuum.
*Wipe as much excess water from wood furniture as you can and remove tabletop lamps and other items from the furniture.
*Turn the air conditioning on for maximum drying in the summer and open the windows in the winter to release trapped for an improved indoor air quality.
*Remove any artwork and paintings from the walls if affected. *Remove any area rugs from the floor and hang to dry outside or inside.
*Remove wet upholstery cushions from the frame and prop them up to dry immediately.
*Place plastic or aluminum foil under any furniture legs that are not plastic to prevent discoloration or bleeding. *Punch tiny holes in a sagging ceiling to relieve trapped water make sure to place something underneath the holes beforehand to collect any A25trapped water.
*Make sure that electrical appliances are turned off while standing on wet carpets, floors or especially on wet concrete floors to prevent possible electrocution.
*Report your damage to your insurance company.
*Get help from a Professional for water damage restoration service.

Hazards caused by a Water Damage in your Home

Growth of Mold
Mildew or Strong Mildew Smell
Unpleasant or Bad Indoor Air Quality
Growth of other kinds of Micro-Organisms

Flood Damage

Most Flood Damages are from natural disasters. To minimize your losses it is good to check always the area of your Property in case you need to purchase additional coverage. Ask your Insurance Company about flood insurance and if you qualify for it.It is always best to have additional coverage if your home or facility is in in a Flood Prone Area.
Remember that water which comes from outside of your home mostly are not covered by your regular home insurance policy. It is always best to read and understand your policy.

In cases of severe storms or hurricanes always be prepared.
Here are some Immediate Thingst that you might need .

* Handheld Radios and Batteries to listen for Warning Updates
* A Good Supply of Bottled Water
* Flashlights with Batteries
* Cellphones Fully Charged
* Jackets or Raincoats

This is a safety reminder by RJ Cleaning and Restoration

Jude Deguzman
RJ Cleaning and Restoration
Serving Maryland / Washington DC / Northern Virginia
Water and Flood Damage Restoration Specialist
http://www.rjcleanrestore.com

Choosing A Walk In Bathtub

Walk in bathtubs are becoming increasingly popular, not only for those who in their senior years find themselves wanting to remain independent, but also for those who are approaching the baby boomer years and preparing for retirement.

With so many models and options now flooding the market, choosing a walk in bathtub can be difficult. Walk in bathtubs are sold on the web under a variety of names and2238 website addresses. If you want to be sure of what you are buying, contact the manufacturer for information about the product. Look for upfront answers to the following questions:

1. How long have you been manufacturing walk in bathtubs?
2. What is the price?
3. Can my local plumber or installer do the installation?
4. Where can I see the bathtub?
5. What is the warranty?
6. Does the bathtub hold more water than a regular bathtub?
7. Does the tub have CSA/UL certification?
8. What options are available?
9. How does your tub differ from other walk in bathtubs on the market?

Beware of companies who try to sell you a walk in bathtub whether it is the right choice for you or not. Walk in bathtubs are not for people who are wheelchair bound and cannot transfer. People who suffer from Alzheimers; someone who could not be left alone to use a stove, should not be left alone to bathe. If you have concerns about the ability of an individual to use the walk in bath, express those concerns. A credible manufacturer will be honest about who the users of their product should be.

It is wise to remember that convenience, comfort and safety should be the main objective you are purchasing a walk-in bathtub.

For more information:
Visit: http://www.safetybath.com
Safety Bath Inc.
504 5th Ave NE
Ituna, Saskatchewan, Canada

Author
Pat Krushen
Phone: 1 877 826 6666 Ext: 22
Fax: 1 306 795 3533
Email: Pat@safetybath.com

Good Quality-Good Design Lead to Champion Sun Rooms

Champion Window began in 1953 as a small manufacturer of aluminum storm windows, doors and awnings. By the 1990s they had moved into other markets, such as the patio room extension, and had grown quite successful. Today, over 40 years later, their business continues to expand and their patio rooms are more in demand than ever. But they never cease in their search for quality, in order to bring the best products to their customers. Indeed, Champion was one of the founding members of the National Sunroom Association in 1997.

Alvin Levine and Arthur Stevens founded Champion Window Company in Cincinnati, Ohio, and that is where the company still has its headquarters. They also have 55 factory showrooms scattered nation-wide (with the majority on the east coast), and of course a comprehensive website which details where each of their dealers are around the country.

A patio room allows you and your family to sit in air-conditioned comfort but still enjoy the view of the outdoors. Champion's All Season Vinyl Patio Room is an ideal solution to the desire to keep insects and gusty winds out and sunlight in!

Champions All Season Vinyl Patio Room

In order to choose a patio room addition to your home, you'll want to make sure that the room enhances your home's existing architecture, rather than detracting from it. You also want a room built from good quality materials, so that the frame will not bend or warp, and the windows and doors will work first time, every time. You don't want to be bothered with condensation or moisture build-up in the windows or in the ceiling.

Champion's windows are easy to operate effortlessly, and will last for the life of the room - which is made with sturdy I-beam construction, and four-inch thick walls and ceilings. Interlocking sashes on the windows and doors make for added security, and also prevent outside air from getting in.

Champion does not present you with a cookie-cutter room that you cannot alter. They have representatives who can speak with you, discuss your needs, and create a customized room to give you years of good service.

Champion provides free, no obligation, in-home consultations and estimates. You'll also want to visit a Champion Factory Showroom nearest you so that you can see their products with your own eyes.

And while you're there, check out there other products as well. Champion offers vinyl window systems, vinyl siding, awnings and doors, and even basement living systems.

Andrew Caxton is the editor of diffe312rent articles published at http://www.allsunrooms.com , with reference to sunroom kits and sun rooms . A website with tips on Champion sunrooms.

Glass Tiles For Your Kitchen - Clean And Clear

Glass tiles are perfect for your kitchen especially if you're thinking of having a contemporary or modern look. These provide a very clean and sleek look that will surely bring in lots of light into the area. Glass tiles are durable as well and are not very hard to maintain aside from what most people would think. Here are some design tips when using glass tiles.

There are different types of glass tiles and colors can vary from transparent to colored opaque. These acquire colors through mixed pigments in molten glass during manufacturing. The color and shade permeate within the tiles' body. During the firing method, a layer of pigment is fused to the tiles' surface. As a result, colors of them are permanent and well-protected against moisture. Color is generally uniform among batches of glass tiles. Clear glass tiles do not use any pigments and are simply molten then fired.

Glass tiles have many advantages. It is moisture-proof which makes it very useful and sturdy in the kitchen. It works best and is most commonly used in walls where it allows light to enter the area without heat.

It is very aesthetic as well considering the variety of colors so people usually create mosaics which serve as a centerpiece of the kitchen. It is good both indoors and outdoors and with its non-permeable quality, endures moisture, heat, fire and ultraviolet rays. By installing glass tiles, other surrounding structures are protected against instant temperature changes.

Smalti is a type of glass tile made up of melted silica with sodium. Some metals and metal oxides are used to stabilize the material before it is fired and hand-cut. Fused glass tiles are usually translucent in nature with a visible opaque layer. Sintered ones usually come in 1 to 3 square feet measurement. It is manufactured by pressing glass powder then heating to fuse particles. Terrazzo glass tiles involve a cast method using glass and concrete amalgam. Cast tiles have a layered appearance created by putting glass chunks into a mold. Slumped glass has a contoured or curved appearance.

For ideas on kitchen tile design, visit http://www.kitchentile101.com

How to Build a Chicken Coop - 6 Crucial Elements on Building a Chicken House

When building a chicken coop, it is suggested that you follow the guidelines below for a successful endeavor.

Element #1. - Appearance and Design:

Sketch out your design on a sheet of paper before you do anything else. Think of the colors you will paint the roof and chicken coop walls. Always keep in mind that if your chicken coop is clearly visible to your neighbors, (unless you live in a farm it will most likely be visible to your entire neighborhood,) it shouldn't ever serve as a distraction or defacement of its utmost surroundings. So make sure to design an aesthetically looking chicken coop so that your neighbors do not complain of its detracting appearance. Once finished, always remember to remove and dispose of any types of garbage or weeds from around your chicken coop. Try to maintain an appealing landscape around it to enhance its overall appearance.

Element #2. - Using Sound Judgment:

When designing your chicken coop structure, you must use sound judgment in almost every aspect of the way.

For instance, you want to use building materials in which the cleaning and disinfecting procedures will be quick and easy. The doors you install should open inwards, not outwards. You don't want your chickens roosting on your windows, so it is best to install sliding windows.

A question many people ask is how to build a chicken coop who's floors are easy to hose and spray down without much puddling? Well the secret to that is to slightly slope the flooring toward the door. This way, when you spray out the chicken coop, the water will flow out, hence solving your puddling problem.

Element # 3. - Protection from Hazardous Elements:

So you want to learn how to build a chicken coop with maximum protection? Then listen up.

As you may know, a well built chicken coop will protect your chickens from hazardous elements such as bad weather (heavy rain, wind, hale, snow, cold climates, etc,) but they will also protect them from hungry predators, theft and injury.

So how do we accomplish that?

Easy. You want to build a draft free chicken house with windows and doors that can be opened and closed as needed. Make sure the windows and doors both have proper screening systems installed in them such as a heavy gage mesh wire. Building the chicken coop on a high yet well drained area with ensure the least amount of dampness of the coop. Be sure to build your chicken coop in an area that faces the sun which will help warm and dry the soil and coop itself after it rains.

To protect your chickens from predators, the best thing to do is to bury your outside runs with chicken wire all around the coop about 1 foot deep. This will prevent some very hungry predators such as raccoons, cats and even dogs from digging underneath it.

Strategy # 4. - Coop Ventilation:

You may be wondering how to build a chicken coop that will not only keep your chickens locked up and protected from bad weather and predators yet receive the proper ventilation it requires. If so, then you already understand the importance of draft free air movement from within the coop. Chickens, much like humans, need fresh air and oxygen. The same goes for the removal of unwanted excessive moisture and carbon dioxide. A chicken coop with ample air movement and proper ventilation will help remove the ammonia build up and dampness that may grow inside its walls.

Speaking of walls, the chicken coop walls should have proper insulation installed which will help keep the chickens dry. As long as chickens are dry, they can handle cold climates very well, but humidity plus cold weather will cause health issues for your poultry. Therefore, insulated walls are a must!

Strategy # 5. - Light Source:

If you want a good source of light and warmth for your chickens during the cold months of the year and a solid source of ventilation during the hot months, then be sure to install the chicken coop windows facing the southside where they will receive direct sunlight throughout the day.

On another note, if your goal is to raise chickens that will produce great eggs all year round, then you should look into an electrical source of light. You should be able to easily install an electrical light at the height of the chicken coop's ceiling which will help keep your chickens warm and help them lay better chicken eggs throughout the year. One ceiling light should be enough for a small scale chicken coop, for larger chicken coops though, try to install one electrical ceiling light per every 30 - 40 feet.

Strategy # 6. - Conveniently placed Wateres and Chicken Feeders:

Chicken feeders and waterers should be placed where your flock will have easy access to them. However, you have to becareful where you place them because chickens like to make a mess of everything they eat due to their chicken scratching instincts. I'm sure you don't want to see your chicken feed mix all over the coop floors so, to avoid this, place the chicken feeders at the height of the chicken's back. This way they will have to stretch their necks up to eat but won't reach the feeders with their feet. Same goes for the waterers. Just make sure to keep the waterers full of fresh clean water throughout the day.

There you have it folks. 6 quick and easy strategies that will show you how to build a chicken coop fast and efficiently. Whether you're building a large scale chicken coop or a small one, these tips should get you moving in the right direction.

Folks, did you know that the average american spends about $300 to build a chicken coop? Some even invest over 2 months of work trying to assemble the darn structure and in the end aren't even fully contempt with their product. Not very enticing is it? A great chicken coop plan can cut your time and efforts in half while saving you a vast amount money on building materials. To learn how to build a chicken coop with maximum benefits for your flock without investing a magnitude of your time and money , click here: how to build a chicken coop.

Dale Higgins has been raising chickens and poultry for over 20 years and is an expert in building chicken coops. You can visit his website here: http://www.mybackyardchickenfarm.com