In recent years the fireplace has become much more than the functional "Heating Element" of a house, evolving into the 'must have' visual focal point of your living space. The transformation in fire design alone has been revolutionary, with higher efficiency and energy saving technology - combined with a variety of fuel bed options, to enhance the "WOW" factor.
Having 20 years experience within the fireplace industry, customers repeatedly say to me that there is much more to consider when buying a fireplace than they first imagined. Hopefully, I can help you to avoid some of the pit falls and provide you with a better understanding of the products available, giving you confidence that your decision will be right. Right for you and your budget, looks right in your home and above all is correctly fitted and meets safety standards and regulations.
Firstly, to ensure that the intended fireplace is going to look right, a measurement of the width of the internal chimney breast needs to be noted. If the property has low ceilings check that you will not find your chosen surround/mantelpiece overpowering. (Remember to add the height of the intended hearth to that of the surround if it is to sit on it.) When choosing a gas fire consider whether maximum heat efficiency is paramount, or is your intention more towards being decorative? If you do need high efficiency then you may have to compromise on the type of fireplace you are contemplating. Note:If the heat output is high, (depending on the kW input of gas) a minimum free flow air vent of 100sq.cm may be required for certain open flued fires.
One important aspect to bear in mind with a recently built property is does it have a "floating floor" (most do for insulation purposes). If so, then the fireplace should be fitted onto a solid base. The builder is likely to include a disclaimer in the sales contract should problems occur due to the fireplace having been fitted directly onto this type of floor construction. I would advise: Do not compromise on fitting - most problems and disappointments are caused due to what appears to be cheap fitting costs or D.I.Y installations. Apart from regulatory measures resulting from ill fitted fireplace and/or fires, the cost of replacing a cracked or broken hearth or back panel (in the case of say natural marble) can be costly. Natural marble is supplied as a set from the same scant, and no two sets are the same.
Whilst on the subject of natural marble, you should be aware that not all marble sold is of the same quality. It is a natural product supplied from various countries and therefore having individual characteristics. Therefore, a low cost marble could be of inferior quality rather than a bargain. Marble is also absorbent and spillage's (particularly soft drinks containing citric acid) can leave stains similar to water marks within the marble, so liquids are best kept away. Natural stone i.e; Sandstone, limestone, hearths and back panels or complete fireplaces are offered. Some simulated stone effect fireplaces are now available which are considerably less expensive but are not suitable for solid fuel fires (in some cases only suitable for electric fires - check for recommended use).
Depending on your choice of intended fire/fireplace and site, will determine the rebate required for the surround. Specific rebate sizes can be ordered but a standard rebate is normally 25-32mm that is adjustable to approximately 75mm on a stock item. The rebate is determined when all other aspects are decided upon and the method of installation has been established.
Finally, for your own peace of mind and safety, it is a legal requirement that any gas installation must be carried out by a CORGI registered gas installer who now should carry a CORGI identity card.
R Pearson is a Director of Fireplace Megadeals an established online retailer of fireplaces, gas fires, electric fires and stoves. For further information please visit their website at http://www.fireplacemegadeals.co.uk.
No comments:
Post a Comment