Eco Friendly Insulating Paint Additive

Eco friendly paint additives are the buzzwords of modern day society. Fueled by constant demands for energy saving products coupled with a psychological desire to limit the damage being caused to our environment through our actions and daily lifestyles. These products promise to be the future answer to some of these problems.

Products of text book marketing theory referred to as "social marketing" for those in the industry. These products are the result of socio-economic demands as an essential component in the complete insulation of homes, building and other premises. Combining the other buzzword of modern day society - convenience, the product ranges are on the whole efficient, effective and very simple to use. Typically applied by adding to paint and away you go, is the claim made by leading manufacturer and distributor Thermilate, based in the UK.

In using such products society will benefit with a win-win situation. Benefits to consumers of such products are the energy saving they promise, which can be as high as 25%. This in turn impacts on costs and provides users with greater control over the temperature in their homes and other buildings where used. The gains for the environment are the resultant reduction in the usage of damaging carbon fuels, one only has to imagine the millions of homes and buildings out there to visualise what the impact on the environment of the absence of such products has been thus far.

These products work by reducing the amount of heat escaping through walls, which many people have yet to realise are a major form of heat loss in their homes or buildings. Social marketing messages to inform consumers across the world about heat loss through windows proved very successful in the 1970's and 1980's backed by multi million pound marketing campaigns. However, in time it has transpired that the messages were incomplete and failed to inform consumers about the heat loss through their walls, which ironically can be far greater than that which takes place through their windows.

How do they work?

Although technologically advanced and safe to use, these paint additives are amazingly simple in their application. Leading eco-friendly additives company Thermilate stated, "they work by reducing the amount of heat escaping through walls via their insulation and reflection properties. The technology has taken years to develop and the resulting product is highly effective."

Heat loss is a fairly simple process - the walls, roofs and flooring are not impenetrable and they allow significant heat loss. These additives are featured in a multitude of journals. Products such as those mentioned above can slow down this process and inhibit this heat loss permanently.

The technology is based on simple micro-spheres, which create an invisible vacuum effect and thus reflect the heat back into the house, creating a double glazing effect for walls. The brand leader in the industry says its products have proved to reduce significant energy losses and energy consumption when these products were utilized. He is very excited about the future of this technology, particularly in its contribution to the global effort on climate change.

Off course the reverse is also true, these products also prevent heat entering a building in hot climates therefore keeping buildings much cooler, which anybody from such a climate will appreciate is a major problem and in doing so saving on air conditioning costs and creating a far more comfortable living environment.

It is recommended that as your first port of call you Google Thermilate. Its many applications are already assisting in the global effort for climate change. The success or failure of the global climate change strategy is hinged upon the cumulative success of individual efforts which will impact on our collaborative environment in the years to come.

Handyman Salaries - Home Repairs

A handyman is a person who does odd jobs related to electrical fittings, plumbing, house cleaning, and garden upkeep. Salaries paid to handymen depend on whether they are self-employed or work for a contractor or franchisee. Self-employed handymen are paid on an hourly basis whereas handy men that work for an organization are paid monthly salaries.

Handymen salaries vary from state to state and are usually higher in big cities such as New York, Washington DC, San Francisco, Detroit, Chicago, and others. Handymen salaries also depend on the experience and skills of a handyman, which means that a handyman with more experience and skills will be paid more than a handyman who has lesser experience.

Based on independent salary surveys, the median pay range for self-employed handymen ranges from fifteen to twenty-five dollars an hour. The median salaries are however less than average salaries, which range from twenty to thirty dollars per hour. Handymen that are employed in an organization can get salaries ranging from thirty-five to forty-five thousand dollars, depending on the remuneration policies of the organization. Handyman services firms also pay commission to their employees in case they bring new work opportunities through their own contacts. They may also get bonuses if they complete their work before time.

Handymen normally prefer working for a contractor or other firms as they have plenty of resources for generating work opportunities. Working in an organization is better then being self-employed, as handymen do not have to use their salaries for purchasing tools and equipment, which is provided by the organization.

Individuals who cannot afford the services of a handyman due to their service rates can perform all the tasks done by handymen with the help of do it yourself (DIY) handyman guides available in the market. They can also take help from friends and acquaintances that have done similar type of work.

Handyman provides detailed information on Handyman, Handyman Services, Starting A Handyman Business, Handyman Tips and more. Handyman is affiliated with Home Remodeling

Foundation Waterproofing Vs Dampproofing

Most people who build a new home with a basement plan on making it an added living space. New homeowners want to install a large screen TV, a pool table or maybe another bedroom. They expect that their basement will be dry and free of water. But what they don't know is that it may be possible that their basements are not waterproof.

Water vapor that gets into a basement causes the musty odors that you smell in a basement. Any liquid water that gets into a basement can damage carpets, drywall and any insulation that is installed inside the basement. And it can cause mold to grow.

First the Basics

Not all foundation coatings are waterproofing. When foundations are built, many are coated with what is called dampproofing. This is a bituminous asphalt membrane that is black in appearance. While it has been used for decades, it does not truly waterproof a basement. Dampproofing can stop water vapor, but that is it. Dampproofing cannot stop liquid water from getting through the foundation walls and into the basement.

Foundation Waterproofing Membranes

According to the ICC-ES, a non-profit public benefit corporation that evaluates products and sets performance criteria for the residential building market, waterproofing must do three things. First, it must stop water vapor. This gaseous form of water is released by the surrounding soils and can move through the foundation walls and into the basement.

Secondly, waterproofing membranes must be able to stop liquid water under hydrostatic pressure. In easy to understand terms, hydrostatic pressure is the force exerted by liquid water that is in the soil. You can think of it just like the water in a water tower. The taller the soil and therefore the higher the water column in it, the greater the hydrostatic pressure against your foundation. Also, the amount of water that is in the soil itself can affect the amount of hydrostatic pressure. The greater the amount of water in the ground, the higher the hydrostatic pressure exerted against the foundation.

Third and most important is that waterproofing must span a crack in a foundation. Foundations crack as a normal process of concrete curing, and if that crack is not sealed against water intrusion, it can leak when it rains.

Why Dampproofing will not Stop Water

Dampproofing does not have the ability to stop liquid water under hydrostatic pressure. This is because it goes on very thin, only 10 mils thick in some cases. Water under hydrostatic pressure can go right through it.

Because the dampproofing is brittle and has no flexibility, it cannot span a crack in a foundation. When the foundation cracks, so does the dampproofing. Therefore, liquid water can penetrate into the basement area.

The terms waterproofing and dampproofing are incorrectly used interchangeably. So, when you are building your new home, be sure that your builder is using a quality waterproofing membrane. It will give years of protection and effectively give you a larger living space that will stay dry and keep your finished basement safe from water.

This article is written by Aaron Kuertz who's with Applied Technologies, LLC. Aaron has been in the waterproofing industry since 1998. Applied Technologies is a manufacturer and supplier to professional waterproofing contractors and homeowners in the United States. For more information about foundation waterproofing visit Applied Technologies on the web

Frozen Pipes - Home Advice For Repairs

First, it's important to know which pipes are frozen. If your water will not drain, this means your drain pipes are frozen. If no water comes out of the faucet, this means that your supply line pipes are frozen.

DRAIN PIPES:

What to do: If your sinks, toilets, showers or tubs will not drain, this means that your drain pipes could be frozen. If your drain pipe is frozen, open cabinet doors or cut into your walls or ceilings to allow the heat from your home to get to the pipes. To heat your pipes faster, a hair dryer is a great way to warm them up. Please use the hair dryer with care - if water starts leaking out, the hair dryer can short circuit.

Why it happens: Many times pipes freeze due to finishing off a basement. When the basement was unfinished, the pipes were exposed to the heat of the home. Once the basement is finished, the sheetrock and insulation blocks off the pipes from getting heat from the home. If the pipes freeze, the could cause damage to newly finished basements.

How to prevent it: A simple precaution for preventing frozen drain pipes can be as easy as cutting a 6x9 return air grate in the area to allow warmth into the joyced cavity. Always remember to insulate your pipes from the cold, but not from the heat in the house.

SUPPLY LINE PIPES:

What to do: If your water will not come out of the faucet or shower head, this means that your supply line could be frozen. Your pipes could be burst, so first you must shut your water off at the main. You will want to get heat to your pipes. The best way to heat them is to open cabinets and doors, cut holes in the walls and use fans or hair dryers to warm them up. Again, please use care when working with the hair dryer, if it gets wet, the hair dryer can short circuit. Warming the pipes is important, and the extent of the damage cannot be determined until they are mostly thawed.

Why it happens: Many times pipes freeze due to recently finishing off a basement or a change in insulation. The pipes in your home need to be insulated only from the cold on the outside, but not from the heat on the inside. If your pipes are insulated from the heat inside your home, they have no way of staying warm.

What do do after the pipes are thawed: If after the pipes are thawed, there are non leaks, many times full operation is returned. Sometimes scale and sediment move through the lines because of the glacial-like action of ice, which pushes sediment into blocked pipes. Because of this, ariators and shower heads may need to removed and cleaned for them to work completely.

If a leak develops because of burst pipes from ice, turn the water off again, and call a plumber. It is helpful to know exact location or even cut open walls to identify the exact location of a split pipe.

How to prevent it: If you are worried your supply lines are going to freeze because of past history or evidence to support that, some plumbers may recommend letting run to keep the water flowing - similar to a water tower. Please do not do this! This can be just as dangerous. The water usually cannot go down the pipes fast enough and it can develop layers of ice and plug the pipe, causing an unattended running faucet to overflow the sink. Another way to prevent a freeze is to take care of those leaky faucets. The dripping into the drain can cause an ice buildup and eventually cause a frozen pipe.

Amanda Klecker - Zell Plumbing & Heating

http://www.zellplumbing.com

Building Projects With Treated Wood - Home Remodeling Ideas

Building with treated wood and the idea that this project will last forever because of the wood you used is not necessarily true. Over the years I have seen contractors and homeowners use treated wood for projects like building decks with this idea in mind.

I just met with a homeowner that was asking me about vinyl fencing. The homeowner approached me with some facts about vinyl fencing. She started to explain to me how long a vinyl fence would last verses a wood fence. I reminded her that the vinyl posts usually slip over metal or wood building materials.

She proceeded to inform me that treated wood will last a lot longer than wood used when building a wooden fence. It took me a while to change her mind and reprogram her with a few picture this from my website. I know this is hard to imagine but wood rots and steel rust.

All you end up with is a vinyl fence that is in pretty good shape if taken care of properly laying down in your yard with broken or rusted fence posts.

Do you know that some people use treated wood for countertops and food preparation areas when building certain projects like an outdoor barbecue? Do you know people build outdoor furniture with treated wood and then sit in it with a chance of toxic chemicals entering into your body? This is where Redwood comes in as a natural building product or other nice looking woods. Redwood is classified as a softwood and if used for a countertop and a barbecue kitchen area you will have to protect it from heavy pans and people using the countertop for a cutting board.

Do not use treated wood for a projects that will be used for food preparation later.

It's a good idea to wash your hands after handling treated lumber. It's a really good idea to wash your hands after using treated lumber if you are going to eat something or make something for another person or yourself.

For all the homeowners and building contractors that use treated wood and bury it in dirt. Or build a low lying deck right above the ground I would like to share something with you. I have been repairing and replacing your work for over 30 years now. You guys keep me busy and I want to thank you for all the years you guys have been in business.

I still can't believe the amount of work I see being done using treated wood with the illusion that it will last longer than regular construction standard wood. I don't know how else to put it except to say treated wood will rot fast in the right conditions.

Treated wood does need to be protected from rain, snow, heat and other elements of the weather. It cannot sit in the dirt or lay in water for long periods of time without slowly disintegrating. Oh yeah one more thing termites will eat sections of the wood that is not completely treated.

Use treated wood properly when building and inform other people about some of the stuff you learned in this article. Reread this article later and save it for the future.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Vista Structural Home Repairs

Rafters Sitting On Garage Beam

Follow Your Instincts When Looking For a Contractor

One of the most popular search terms on the Internet is the word "contractor." People are searching on how to find good ones, recommendations, reviews, and information to back up who the contractors actually say they are. The largest global topic about contractors is "how do I find a good one?"

If you're looking for a contractor, or have recommendations or names, the first step in getting to know someone who's going to be doing work in your home is to call them.

When you call them, set up a sit down conversation about your project. Remind them to bring their license numbers and credentials. Having them provide pictures of past jobs only helps you to see their individual style and how it might coincide with yours. This first meeting is for them to get an idea of the job and for you to feel out your reactions to them being in the home.

My first rule with this is simple: Trust your gut.

If you get a funny feeling having the person in the home, most likely it's not someone you're going to trust to have there and in the long term this can and will cause problems. Not only will they feel like you're trying to "watch their every move" through the whole project, you'll be uncomfortable with the whole process. Avoid this at the beginning, smile and nod, and kindly say "I don't think we're going to be a match."

Second rule: Once you find a contractor you get along with check their license number against the state records.

Simply put, there are many capable people out there who are trained to do your home improvement job the right way. There are also many capable people who don't really follow the rules. To further narrow down the field of people you're going to let do work in your home, compare their contractor license number against state records.

You can easily do this on most State's Public Safety Department websites as well as over the phone. This information will let you know who's up to date, keeping certified and if "everything is in order." Not to say that people who are carrying out of date license numbers are bad, but it means that the state won't protect you against something that goes wrong in the case that something does in deed go "off-plan".

Always trust your gut and always check the information they give you. Just two ways to keep yourself protected, prepared and on your way to finding the right contractor for your job.

Jacob Lee - pioneer basement
http://www.pioneerbasement.com

Leveling Your Floor - Home Repair Tips

If you've ever been in a building where you feel like you are getting pushed to one side and you can't seem to stand up. You have either been drinking too much alcohol or the floor could be sloping. I was just in a store the other day that was full of antiques and glass but I could hardly stand up because the floor was sloping enough to create what I would consider a liability issue to the store owner.

Sloping floors are not going to be that easy to fix and repair. Repairing these floors will require a little skill and it would be a good idea to hire a professional to repair the damage. This is not going to be a simple fix and this is probably the main reason most people never choose to fix their sloping floors.

Fixing these floors will require either pouring a new concrete slab, replacing the wood floor framing members or replacing the actual building foundation itself. No matter how you look at it the sloping floor is going to be a costly item to repair.

What causes a sloping floor? Termite damage or dry rot destroying the wood framing or it could be as simple as a water leak over a long period of time causing the building foundation to sink and become out of level. Poor soil conditions with either too sandy or an expansive clay soil could be the culprit also.

Sloping floors can be damaged from incorrect landscape drainage. This would involve water settling around the foundation of your home and over a period of time the weight of the house along with soil problems can create the building to start sloping to one side.

The number one contributor to a sloping floor again like most damage done to a house is going to be water. Do your best to keep the water away from the house using roof gutters and landscape drains. These items are relatively inexpensive compared to the costs involved in repairing sloping floors.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Find out more about Water Damage.

Structural Framing Beams